Toro Equipment Filter Press
Draco filter presses developed by Toro Equipment S.L. are designed for the optimum dehydration of sludge, whether of industrial or urban origin.
The different filter presses sizes and models are manufactured in St 37-2 Steel, AISI 304 and GRP. The surface finish using epoxy paint protects the filter press from potential corrosion.
The three filter presses models offer a wide range of possibilities where size and number of filter plates are concerned.
The standard sizes are: 470 x 470, 630 x 630, 800 x 800, 1,000 x 1,000 and 1,200 x 1,200.
Draco Automatic Filter Press FPA
Draco® Automatic Filter Press is the most complete model in the Draco® range, because it carries out the complete sludge dehydration cycle automatically.
This Filter Press is provided with the following:
- Hydraulic unit
- Air circuit for blowing the sludge cakes
- Safety systems
- Shaking shaft to make the sludge cakes fall
- Drain pot
- Flanges that comply with the regulations
Draco Semi Automatic Filter Press FPSA
This Filter Press model is characterized by the filter package closure system, which is operated by a joystick that governs the compact hydraulic unit.
Semi Automatic Filter Press is provided with the following:
- Hydraulic unit
- Air circuit for blowing the sludge cakes
- Safety systems
- Drain pot
- Flanges that comply with the regulations
Draco Manual Filter Press FPM
Manual Filter Press is the simplest model in the Draco® range. It features a pump with a manual lever for operating the filter package opening and closing system.
This Filter Press is provided with the following:
- Air circuit for blowing the sludge cakes
- Drain pot
- Flanges that comply with the regulations
